Illustink

How to print a tattoo stencil at the exact size

A stencil that comes out a few percent smaller can ruin a placement. These steps keep it exact.

1. Set the size in centimetres

Measure the placement and enter the width in Illustink. The height follows automatically from your image.

2. Print at 100%

In the print dialog, choose 100%, Actual size or No scaling. Avoid Fit to page or Shrink to fit: those quietly resize the stencil. On a phone, check the scale setting in the print options as well.

3. Measure the 1 cm bar

Every Illustink PDF has a small bar that should measure exactly 1 cm. Measure it with a ruler. If it is off, your printer or app is scaling the page.

4. Test your printer once

Download the free printer test page from Illustink. It has 10 cm rulers, line weights from thin to thick, dots and a solid area, so you can see which line weight transfers cleanly on your own printer and stencil paper.

5. Large pieces over several pages

When a stencil is bigger than one A4 sheet, Illustink splits the PDF over several pages. Each page has a 1 cm overlap, alignment crosses and a small map that shows where the page belongs. Line up the crosses, tape the pages together, and transfer the stencil in sections.

Thermal printers and copiers differ. Check your printer's own settings for darkness and paper type.

Make your stencil now, freeOpen Illustink →